SAS Logo
  PTS Plus Series Pnuematic Thermal Assembly System

Specialized Assembly Systems, LLC  7685 Hawthorne Place  Livermore, CA 94550   Toll-Free: (877) 642-7100  Fax: (925) 215-2187

SAS PTS Plus Series Pneumatic Thermal Assembly System

click on the picture for dimensions

Specifications:

  • Power Requirements: 110VAC, 50/60 Hz
  • Current draw (Tooling Dependant)
  • Pneumatic requirements: Clean, dry air @ 100 psig
  • Maximum Force:
    (PTS-120 Plus) 120 lbs. @ 100 psig
    (PTS-500 Plus) 500 lbs. @ 100 psig
  • Stroke Length: up to 4” (10.16 cm)
  • Head adjustment: 4” to 16”
  • Weight: 72 lbs.
These heat staking systems are advanced STATE-OF-THE-ART “SMART” Systems. The brain of these intelligent systems is an Embedded Microprocessor. This pneumatically-operated bench-top system’s Standard “Smart” Features include;

  • 3–Post/In-Cycle Cool modes
  • 2 Parts Counters
  • 1 resetable and 1 lifetime
  • Program Memory for up to 5-different setup parameters
  • Maintenance Screen aalows for easy troubleshooting and set-up
  • The adjustable Head Height includes a pair of column clamp handles and a counter balance spring, which make the head both light and easy to move.
  • Plug and Play system allows for instant recognition  and operation between: Basic Machine Operation mode and Optional Slide Table or 2 position Rotary Table. 

Features

  • Up to 120 pounds of down force (PTS-120 Plus) or up to 500lbs (PTS-500 Plus)
  • Adjustable Opening Height from 4” to 16”
  • Adjustable mechanical stop for fine tool adjustment
  • Digital dwell timers for repeatable process control for both the heat cycle and cool cycle
  • Adjustable Hydraulic Decelerator for controlled tooling advance
  • Dual, anti-tie-down, no-touch ergonomic actuation
  • 80-999 degree F operating range +/- 2 degree accuracy
  • Microprocessor-based, digital display temperature controller for accurate thermal process control
  • Standard Thermal Probe has built-in thermocouple
  • Non-asbestos insulator
  • 3” x 4” upper tooling platen
  • Cast Aluminum Base with E-Stop and fixture mounting holes
  • Air filter regulator and air flow controls to adjust up and down stroke speeds

Optional Items:

  • Manual or Pneumatic Slide Table
  • Rotary or indexing dial table
  • Post cooling system
  • Part Hold Down Plungers
  • Pneumatic Clamping System
  • Part in place sensors
  • Part Load or unload automation systems
  • Integrated Linear Encoder with Go/No-Go program
  • Safety guarding or Light Curtain Systems
  • Inspection, data acquisition, and part traceability systems
  • Custom automation available

To view a detailed picture of the PTS Plus Series click here

For more information, a detailed quote, or to place an order, please contact us either via e-mail at support@sasusa.com or call us at (877) 642-7100.

SAS is the solutions resource for all of your plastic assembly & decorating equipment and services.